UNISHADES No Drill Cordless Roman Shades, Room Darkening, 35×64 in White

Light At The Glass

The polyester panel is woven for room darkening, so daylight and UV are held at the glass instead of washing across the floor. Lowered fully, the shade takes a bedroom down to a level that suits late mornings and shift sleep. Furniture, rugs and wood finishes near a south facing window fade more slowly under a panel that keeps the sun off them.

Tension Mount, No Screws

Nothing is drilled into the frame. The tension mount system presses the head rail into the window opening, so a 35 in wide window can be covered in a few minutes with no screws, no anchors and no patching later. Apartments, dorms and rented houses keep their trim intact, and the shade lifts back out of the opening when the lease ends.

Ordering The Exact Width

This shade is built for inside mount only. Measure the window width and order that exact figure without rounding, because the finished panel is made 3/8 in narrower so that it clears the frame. Height should be ordered at or above the true window height, never below it. Written down carefully, those two numbers are the whole job.

Cordless By Design

There is no loop, no chain and no dangling pull at the side of the window. The bottom rail is lifted or lowered by hand and stays at the height it is left, which removes the tangle risk that cords create around small children and pets. A tall 64 in drop can be stopped halfway for daylight and taken to the sill at night.